HP Envy 7640 Troubleshooting

There is a high possibility the HP Envy 7640 printer can face issues from time to time. Common issues may occur when you own a printer. When it comes to HP printers the troubleshooting measures that should be taken are simple and easy. We have devised a list of simple steps to assist in the process of removing the issues from the HP Envy 7640 printer.

hp envy 7640 airprint setup

HP Envy 7640 Printer Offline Error

Follow the below steps if the HP Envy 7640 printer indicates that it is offline.

  • Complete a few checks to make sure all that important factors are in place before making any change to the printer.
  • Make sure there is an active wireless connection that the printer and the device are connected to.
  • Check if all the cables connecting the HP Envy 7640 and the device are intact.
  • Check if the HP Envy 7640 printer is not set on offline mode.
  • For this, open the device control panel and choose Printers and Devices.
  • Locate the HP Envy 7640 printer and right-click it.
  • Select Use Printer Online. This will bring the printer online.
  • If the issue continues to prevail check if the printer driver is updated.
  • Complete the update of the HP Envy 7640 printer.
  • Check if the device is updated and restart the printer and the device.

HP Envy 7640 Driver is Unavailable

Complete the following steps to remove the HP Envy 7640 driver issue that is unavailable.

  • Complete a quick check to make sure the device software is updated.
  • If there is an update available complete the download of the device software.
  • Check if the HP Envy 7640 driver should be updated.
  • If there is an update, complete updating the HP Envy 7640 driver.
  • If the issue continues to prevail, then the printer driver has to be uninstalled.
  • To uninstall the HP Envy 7640 printer driver, open the Control Panel.
  • Choose Printers and Devices and choose the HP Envy 7640 from the list.
  • Right-click the HP Envy 7640 and click Uninstall from the popup menu.
  • To reinstall the HP Envy 7640 printer driver, open the HP Support Page.
  • Enter the details of the printer such as the name – HP Envy 7640 and enter the details of the operating system.
  • Complete the installation by following the on-screen instructions to resolve the hp envy 7640 troubleshooting issues.

Need Help on HP Officejet 7640 Printers?

Are you looking for HP Envy 7640 Troubleshooting issues? No Worries! Make us a call and speak to our expert printer technicians.

HP Envy 7640 Won’t Connect to Wifi

Complete the below checks and the steps to remove the HP Envy 7640 printer issue where the HP Envy 7640 won’t connect to wifi.

  • Complete the first step by making sure there is an active wireless connection that the printer and the device are connected to.
  • The connection should be stable and the wifi router should be compatible with the HP Envy 7640 printer.
  • Try to connect the printer to an alternative wireless network to make sure the issue is with the wireless network and not the printer.
  • Restart the wireless router. Press and hold the power button down for a few seconds.
  • Wait until all the lights on the wifi router go off. Allow it to remain idle for a few minutes.
  • Turn the wifi router on and then try to establish the connection again.
  • Restart the HP Envy 7640 printer. For this, remove the power cord from the printer’s end and then from the power supply.
  • Connect the power cord after a few minutes and connect turn on the printer.
  • Follow the link to build the initial connection of HP Envy 7640 wireless setup.

These steps should allow the HP Envy 7640 printer to connect to the wifi.

HP Envy 7640 Printer is not Working

Follow the below steps to remove the issue of the HP Envy 7640 printer not working.

  • Make sure there is an active wireless connection that the HP Envy 7640 printer and the device are connected to.
  • Restart the wireless router. Press and hold the power button down for a few seconds and wait for all the lights to go out.
  • Allow it to remain idle for a few seconds and turn it back on.
  • Restart the HP Envy 7640 printer as well. While the printer is powered up, yank the power cord from the rear end of the printer and then from the power supply.
  • Allow the HP Envy 7640 printer to remain idle for a few minutes and connect the power cord back.
  • This will allow the HP Envy 7640 printer to be powered up automatically.
  • Complete the same for the device as well. Restart the device and allow it to switch on again.
  • Check if the HP Envy 7640 driver and the device have to be updated. Complete it at once.

HP Envy 7640 Scanner not Working

Complete the following measures to make sure the HP Envy 7640 scanner not working issue is removed.

  • The first step would require you to restart the HP Envy 7640 printer.
  • To complete this step, remove the power cord from the rear end of the printer and the other end from the power supply.
  • Allow the printer to remain idle for a few minutes then connect it back.
  • Attach the power cord to the rear end of the printer and the power supply, it will automatically turn back on.
  • Following this, check if there is a driver update that is available. Update the driver.
  • Check if the device needs to be updated. Complete the software update at once.
  • While trying to scan, check if there are any internal changes that have been made in the settings.
  • After all the above changes have been made, learn how to scan on hp envy 7640 printer

HP Envy 7640 Printer is not Printing

    • Check if the HP Envy 7640 printer is powered up and connected to a wireless network.
    • Check if the wireless network is stable and there is an active connection.
    • The HP Envy 7640 printer and the device should be connected to the same wireless connection.
    • Check if the HP Envy 7640 printer driver and the device should be updated. If yes, complete the update at once.
    • Following this, check if there is sufficient ink in the cartridges. Replace it if necessary.
    • There should be sufficient sheets of paper in the paper feeding tray. Replace the existing sheets with high-quality sheets of paper.
    • Restart the HP Envy 7640, the device and the wireless connection.
    • Complete a final test print to ensure the issue of the printer, HP Envy 7640 print not printing is removed.